Use of La2O3 with 8YSZ as thermal barrier coating and its effect on thermal cycle behavior,microstructure, mechanical properties and performance of diesel engine operated by hydrogen-algae biodiesel blend

In this present work, the effect of lanthanum oxides (La₂O₃) on the thermal cycle behavior of TBC coatings and mechanical properties such as adhesion strength and microhardness of 8% Yttria Stabilized Zirconia (8YSZ) TBCs were investigated. CoNiCrAlY and aluminium alloy (Al–13%Si) were used as bond coat and substrate materials. 8YSZ and different wt % of La₂O₃ (10, 20, and 30%) top coatings were applied using the atmospheric plasma spray (APS) method. The thermal cycling test for TBC coated samples were conducted at 800 °C in the electric furnace. The XRD pattern shows that the La₂O₃ doped 8YSZ material transformed to cubic pyrochloric structured La₂Zr₂O₇ during thermal cycling. Further, the Taguchi-based grey relation analysis (GRA) method was applied to optimize the TBC coating parameters to achieve better mechanical properties such as adhesion strength and microhardness. And the optimized La₂O₃/8YSZ TBC coating was coated on CRDI engine combustion chamber components. The engine was tested with microalgae biodiesel and hydrogen, and the results were promising for the TBC-coated engine. The engine performance increased while using La₂O₃/8YSZ coated components, and the emissions from engine exhaust gas such as CO, HC, and smoke reduced considerably. It was found that there was no separation crack and spallation of the coating layer in the microstructure. Ultimately, the microstructural analysis of the optimized TBC coated piston sample after 50 h of running in the diesel engine confirmed that the developed coating had a superior thermal insulation effect and longer life.     

Effect of utilization of hydrogen-rich reformed biogas on the performance and emission characteristics of common rail diesel engine

The utilization of renewable gaseous fuels in the diesel engine has gained significant interest in recent years due to its clean-burning nature and higher availability. In this study, hydrogen-rich reformed biogas was used as a gaseous fuel in a common rail diesel engine with diesel as pilot fuel. The hydrogen-rich reformed gas was synthesized through dry-oxidative reforming. The experimentations were performed in the load range from 6 to 24 N m with two different flow rates of gaseous fuel (0.5 and 1.5 kg/h) at a constant speed of 1800 RPM. The effects on engine performance parameters (brake thermal efficiency, brake specific energy consumption, and brake specific diesel consumption), combustion parameters (rate of pressure rise and maximum heat release rate) and emission parameters (Unburnt hydrocarbons, nitrogen oxides, carbon monoxide, and carbon dioxide) were assessed. The induction of gaseous fuel led to an increase in brake thermal efficiency by 10.5%, reduction in brake specific energy consumption by 13.6%, and a reduction of 26.4% in brake specific diesel consumption with a flow rate of 0.5 kg/h when compared to diesel-only mode at 24 N m load. The HC, NO_X and CO₂ emissions were reduced by 18.2%, 7.4% and 1.4% with a flow rate of 0.5 kg/h when compared to diesel-only mode at 24 N m load due to lower availability of carbon content in the combustible mixture. The utilization of renewable fuel like hydrogen-rich reformed biogas has great potential for overcoming the issue related to both biogas and hydrogen in diesel engines. Moreover, the higher diesel substitution also demonstrates the potential for cost-saving and fossil fuel conservation.     

定距螺旋桨对船用主机外特性的要求分析

为解决定距螺旋桨与船用主机在船舶运行工况的机桨匹配问题,结合船舶系泊和航行试验的相关标准,分析和归纳船舶运行数据,将实船测试与船机桨匹配理论计算相结合,得出运输船和拖轮在常用工况及特殊工况下定距螺旋桨对主机外特性的定量要求,为配套不同细分市场时船用主机的优化和开发提供参考依据。     

Modelling,simulation and identification of an engine air path electromechanical actuator

This paper deals with the modelling and the identification of an electromechanical Diesel engine actuator. The studied Bosch GPA-S actuator is designed for swirl/tumble flaps to control the air amount entering into the cylinder. This study aims to design a complete simulator that reproduces, with sufficient accuracy, the actuator dynamics taking into account the effects of the friction phenomenon. Hence, an overview of the actuator structure and its operation principle is first given. Then, its mathematical model as well as the nonlinearity, related to its behaviour, is discussed. Next, three identification procedures, which allow estimating both the system parameters and the friction model coefficients, are introduced. Finally, simulation results, using MATLAB, and experimental results, using LabVIEW, are presented demonstrating the effectiveness of the proposed techniques.     

发动机尾气余热驱动的吸附式空调系统仿真与测试

针对在高太阳辐射地区，柴油车驾驶室内使用车载空调会增加车辆发动机的耗油量、降低柴油车经济效益的问题，搭建了一套由发动机尾气余热驱动的吸附式车载空调系统。系统由填充有氯化钙/氯化锰/硫化膨胀石墨复合吸附剂的吸附床、蒸发器、冷凝器、储液罐和阀门组成，使用氨作为制冷剂，利用车辆在行驶时接触到的自然风为吸附床冷却，在发动机尾气余热的驱动下，为驾驶室内提供连续的制冷效果。结合仿真和实验测试，对所设计系统的制冷性能进行了分析，仿真结果表明，系统最优循环时间为45 min，系统的理论平均制冷功率可达3.5 kW以上，系统COP处于0.2~0.25之间。实验结果表明，在230℃的尾气温度条件下，系统能产生3 kW的平均制冷量。在40℃环境温度条件下，系统在蒸发器进出口处的平均温差为6.5℃，平均制冷量为3.2 kW。     

石化企业实时数据管理引擎设计与实现

实时数据管理系统是流程企业控制信息网络与管理信息网络平滑集成的基础，为两者的数据通讯提供桥梁。介绍了笔者在炼油化工C企业IMS建设中的实时数据管理引擎设计与开发，具有其先进性与实用性。     

基于SpatialWare的地理数据访问安全性研究

地理信息系统的应用越来越广泛,特别是基于网络的GIS的发展使地理空间信息通过网络被多用户所共享,因此必须考虑地理数据访问的安全性。文章以MapInfoSpatailWare空间数据引擎为研究对象,给出了基于此模式的数据访问安全性解决方案。     

红外光谱法评价内燃机油高温清净性的研究

研究了内燃机油的红外光谱信息与其高温清净性能的相关性。根据内燃机油的红外光谱信息，采用量化自组织神经网络数学模型预测内燃机油的高温清净性能，在此基础上，建立了红外光谱快速检测内燃机油高温清净性能的方法。结果表明，预测结果的准确性、误差都能够满足对内燃机油高温清净性能测试的要求，红外光谱分析为快速检测内燃机油的高温清净性能提供了又一途径。     

CF-4 5W/40柴油机油的粘温性能研究

对几种加氢裂化、加氢异构脱蜡及溶剂精制基础油作为CF-4 5W/40柴油机油的基础油进行筛选,并讨论分析了基础油、粘度指数改进剂、降凝剂、复合剂对低温动力粘度的影响,结果表明:影响油品低温动力粘度的主要因素是基础油、粘度指数改进剂及功能添加剂,其中基础油的影响最大。为调制大跨度粘度等级的CF-45W/40柴油机油提供了依据。     

小型汽油发电机供电时整流电源工作不稳定情况分析

本文通过对小功率汽油发电机组对高频开关电源供电时出现的不稳定现象进行分析,提出了可行的改造及解决方案.